Butterfly valve

Lined valve

出厂严格质检
成套设备供应
选型技术支持

Features:

Upper and lower set of Belleville springs put pressure to keep the two sealing surfaces of the stem seal together resulting in a superior TA-Luft / VDI 2440 approved. tem seal.

The elastomer back-up pads behind the liner ensure a tight fit around the disc, for a bubble tight shut-off.

The liner provides a wide flange sealing surface.

A one piece thin disc stem lined with 3 mm molded PFA providing high Kv values.

The liner and disc are the only two valve parts in contact with the medium.

Primary shaft sealing by preloaded contact between disc and liner hub.

Secondary shaft seal by oversizing the shaft diameter in relation to the shaft hole in the liner.

The liner and disc are molded and machined to close tolerances to provide:

  • low torque
  • less stress and deformation during opening and closing

 

Vacuum tests with helium with pressures less than 20 Pa absolute (0.2 mbarA).

Optional TFM lining available for extremely demanding applications.

Integral body locating holes to ensure perfect centering of the valve.

Actuator flange and stem dimensions acc. ISO 5211.

Specifications:

Certifications PED, Fugitive Emission, CUTR, CRN, CE

End Connection Lugged, Wafer

Body Design Short Pattern

Material Ductile Iron

Operating Temperature Less Than 200 C

Pressure Class PN

Seat/Seal Type Lined

Valve Size Standard DN

Media Aggressive Liquids/Gases

TECHNICAL SUPPORT

选型与技术支持

如需确认产品的通径、压力等级、材质与执行机构配置,欢迎致电或邮件联系。技术团队将结合介质、温度、压力与流量工况提供选型建议。

防伪查询
4000629011 sale@masoneilangroup.com