Water system control valve

Pump control valve

出厂严格质检
成套设备供应
选型技术支持
The pump control valve is a pilot operated valve designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. The pump starts against a closed valve. When the pump is started, the solenoid control is energized and the valve begins to open slowly, gradually increasing line pressure to full pumping head. When the pump is signaled to shut-off, the solenoid control is de-energized and the valve begins to close slowly, gradually reducing flow while the pump continues to run. When the valve is closed, a limit switch assembly, which serves as an electrical interlock between the valve and the pump, releases the pump started and the pump stops. Should a power failure occur, a built-in, lift-type check valve closes the moment flow stops, preventing reverse flow regardless of solenoid or diaphragm assembly position.
TECHNICAL SUPPORT

选型与技术支持

如需确认产品的通径、压力等级、材质与执行机构配置,欢迎致电或邮件联系。技术团队将结合介质、温度、压力与流量工况提供选型建议。

防伪查询
4000629011 sale@masoneilangroup.com